Installation guide
bandeau pose
Installation & Maintenance

Find all the different documents and videos to help you install your Océwood Decking or Fencing. 

 

Our work sites
Installation manuals (PDF) Videos - Boréale & Boréale Design (FENCING)

Fixing aluminium posts

Aluminium posts are the foundation of your fencing. Follow the manual to ensure that your posts are properly installed.

The post can be fixed either on the ground or on a low wall. Refer to technical data sheet or the installation videos below. 

 

1. Fixing on a low wall

 

 

2. Fixing on bare ground

 

 

Installing composite wood boards

 

Installing Boréale Design decorative boards

 

 

Maintaining your Océwood® composite fencing

Although composite wood fencing requires very little structural maintenance, it is nevertheless necessary to wash and protect your boards at the end of the installation process and to eliminate any marks or damage that have occurred during the winter at the beginning of spring:

  • Go over the boards with a high pressure water cleaner to remove any dust after sanding.
  • Once the fencing has been well cleaned, spray the whole surface with moss remover.

 

Videos - 1.Joists (DECKING)

Installing the joists

The joists determine the flatness and the longevity of the boarding. Find the essential rules for quality installation of bearers and joists. 

1. Composite wood joists (only on concrete slabs)

 

2. Aluminium joists on stubs

Videos - 2.Fixing the Boards (DECKING)

Fixing the Boards

1. Optima/Optima Plus boards (Optima Clip)

Océwood boards are 100% composite. They do not behave like a wood decking board. Certain installation principles must be observed relating to the expansion space, fixing systems, and preparation of the boards.

Optima & Optima Plus boards can only be fixed using Optima clips. Discover the clip installation video: 

 

 

2. Classik boards (Classik clip)

Classik boards can only be fixed with Classik clips. Discover the clip installation video: 

 

Videos - 3.Finishes(DECKING)

Deck finishes

Flexible or rigid, the peripheral angle profiles give a neat, attractive finish to your deck.

 

Videos - 4.Maintenance (DECKING)

Maintaining your composite wood decking  

Although decking in composite wood requires very little structural maintenance, it is however necessary to wash and protect your boards at the end of the installation process:

Go over the boards with a high pressure water cleaner to remove any dust after sanding.
Once the decking has been well cleaned, spray the whole surface with moss remover.

Simple cleaning of your decking at the end of each winter period with conventional products is then sufficient: high pressure water cleaner, moss remover.

Before maintenance, Composite wood before maintenance  During maintenance, Composite wood during maintenance  After maintenance, Composite wood after maintenance

Before maintenance                    During maintenance                    After maintenance

 

 

Revenir en haut de page