Accessories

For Boreale Fencing

Cloture de jardin en bois composite Boréale - Gris Clair - Ocewood
Fencing Accessories

Apart from boards and posts, several accessories are essential for the maintenance and appearance of your Boréale or Boréale Design fencing...
These accessories are supplied in Board Packs (3 boards + 1 reinforcement) or Post packs (1 post + 1 finishing trim + 1 end piece + 1 insert + fixing hardware).

 

fencing accessories

avantage-inertie
INERTIA

With their cellular profile, Océwood® boards have excellent inertia.

avantage-usinage
MACHINING

Océwood composite is machined in the same way as wood, which is ideal for cutting.

avantage-securite
SECURITY

Océwood® boards do not splinter. Its cellular profile enables board's ventilation and captures less heat compared to full boards.

avantage-durabilite
DURABILITY

Particularly adapted to seaside, the Océwood Composite is designed to resist to bad weather and wet or salted areas.

avantage-made-in-france
MADE IN FRANCE

All Océwood® composite wood boards are made in France, in our factory in the Vendée area.

avantage-couleurs
COLOUR

Coextrusion associated with very high quality pigments ensure the boards keep their colour remarkably well over time.

avantage-qualite
QUALITY

With PVC, a material perfectly adapted for an outside use, our products undergo numerous resistance tests

avantage-entretien
MAINTENANCE

Although as like any other material installed outside Océwood® composite boards require a yearly cleaning, they require very little structural maintenance.

Our work sites
End piece

embout sable

 

Exclusively designed for Boréale fencing posts from Océwood®

  • Material: sandblasted PVC
  • Colours: available in black

 

Finishing trim

In aluminium, it matches the posts, and offers a strong and stylish finish. It is fitted on to the last board. 

 
  • Dimensions: 37 x 33 mm cloture_accessoires_feuillure
  • Length: 1970 mm
  • Material: Aluminum
  • Colours: 8 colours the same as the posts

The aluminium angle profile is glued using MS55 glue. 

Insert

Bedded in the ground or the concrete stud, it supports the post to which it is attached and spreads the preinsertsssure. Galvanised steel.
Dimensions:  

  • 150 + 150 (heights >or = to 1235 mm (on low wall)
  • 400 + 400 (Heights > than 1835 mm (in the ground)

   

Reinforcement

Slides into the 1st and last board in each panel. A 3rd reinforcement may be necessary half way up the panel for heights greater than or equal to 1400mm.

  • Material: Steelcloture_accessoires_renforts
  • Dimensions: 22 x 32 x 22mm
  • Length: 1950mm. 

NB: the reinforcements are included in the board packs. 

Fixing hardware

Locks the board for special angles (other than 180°C and right angles). joint de bourrage

  • Material: rubber
  • Dimensions: 15 x 8 mm
  • Length: sold by linear metre 
Revenir en haut de page